While installing a new front-end assembly, Kevin and Willie try to correct the frame geometry of a ‘32 Ford.

Kevin visits an after-market manufacturer in Illinois.

Fresh out of the paint shop, the guys install a new suspension and look at accessories for a 1969 Mustang.

Willie works out a dent on a new hood.

Basic welding with a plasma cutter.

Rebuilding the upper and lower intake on a 200,000 mile vehicle.

The guys upgrade the cooling on an ‘08 EVO, demonstrating what happens with the extra pressure.

While working on a new Challenger, the guys reminisce about the Mopars of old.

Kevin and Willie replace a tired old leaf spring with a monster torque arm suspension.

Kevin visits a NASCAR team’s race shop.

A new ring gear brings a Model A back to life.

Choosing the right rear constructions for any application.

Willie and Kevin tour the shop, showing off their latest tools and gadgets.

Kevin and Willie fabricate a new engine stand for the shop.

Kevin and Willie B. discuss the development of Chevy’s iconic small block engine and how it evolved into today’s LS series.

Kevin and Willie B. hit the road for the KOI Cavalcade of Customs car show in Cincinnati.

Kevin and Willie B. add some personal touches to a Wildcat UTV.

Willie brings a Mopar out of the stable for a much needed suspension and transmission upgrade.

Willie and Kevin pull out all the power on a modified C6 ‘Vette.

Kevin fixes the rolled area of a fender.

After a diesel truck goes mid 10’s in a grudge run, Willie looks into how it can put out so much power.

Marine veteran John Hayes gets the ride of a lifetime in his new C-6 Turbo-charged Corvette.

A WRX STI is unleashed with some track inspired upgrades.

Willie and Kevin offer some tips to make sure a new college student’s car is reliable for years to come.

Drag racing legend Don Garlits drops by the garage for some help with upgrades to his Chrysler 300.

Willie and Kevin set out to build a monster Corvette with a new twin turbo system.

Willie and Kevin pull out all the power on a modified C6 ‘Vette.

Bryan Fuller and Kevin Byrd share their expertise on a variety of automotive tech issues of high interest to the do-it-yourselfer and trade professional.

Kevin and Bryan add 130 horsepower to a brand new 2012 Mustang.

Kevin and Bryan prepare a Saturn for donation to Wheels for Hope.

Bryan demonstrates the right way to change a braking system.

Replacing the fuel system on the Mustang project car.

A 67 Mustang road racer has a date with the Boss, a new Ford Racing “powerplant”.

Kevin meets off road racers Sam Hubinette and Casey Currie.

The guys check out the MAF sensor on a rough running Impala.

Kevin and Bryan finish the Federated Corvette project and give a lucky Vette owner a new performance clutch.

Bryan and Kevin are back to work, giving the ‘Vette a little extra horsepower.

Kevin attends a California car show celebrating the spirit of the collector.

Kevin and Bryan add a touch of their own style to a new Prius.

Kevin and Bryan upgrade the Corvette with a new suspension.

Kevin and Bryan supercharge a 2010 Camaro pace car.

Kevin learns about biodegradeable oil and how it’s manufactured.

Ken Schrader drops off a 2004 Corvette in need of some TLC.

Kevin and Bryan add aftermarket products to a Lexus IS250.

Bryan picks up a few tips on auto detailing.

Upgrading the power steering on an older vehicle.

Kevin and Bryan hit the road for a classic auto show in Brooksville, Florida.

Kevin and Bryan prepare a Saturn for donation to Wheels for Hope.

The guys check out the MAF sensor on a rough running Impala.

First, an A/C cooling problem on a Toyota Tacoma, then, a look at Kevin’s hot rod BMW.

Fuller shares fabrication tips with wounded soldiers in San Antonio, Texas.

A look at the technology behind turbochargers and intercoolers during an upgrade on a F250 Superduty.

Fuller and Byrd open up the jets in the carburetor for better performance.

Kevin takes us through variable cam timing in Ford’s new 5.0L power plant.

Kevin and Bryan tear up a motor to see the importance of the serpentine belt.

Kevin visits Magnaflow to see what it takes to get that perfect sounding exhaust.

Kevin installs a new wiring harness while Bryan welds up a new exhaust for our Nova.

Kevin and Bryan make a 2010 SS throw back Camaro look even better.

The guys finish the roll cage, then patch panels on the Fuller Hot Rod Project.

Their project finished, Kevin and Bryan take their car to the streets.

Bryan and Kevin get the body on their Factory Five hot rod.

Kevin and Bryan start the engine work on a Factory Five hot rod.

Kevin services a tournament series high performance boat while Bryan welds up a new casting platform.

Working on Kevin’s hot rod BMW calls for the use of some unusual tools.

Kevin travels to Indiana to solve the mysteries of the catalytic converter.

Work continues on Kevin’s LSM3 project.

Kevin and Bryan install an exhaust kit on a new Challenger and then prepare Bryan’s 33 for a chop.

Bryan fulfills his dream of chopping the top on his 33.

Sam Memmolo is back to match wits with Kevin over the new 6.7 diesel Cummins.

Bryan rips apart a brand new Buell and gives it the Fuller touch.

Bryan’s project The Impaler is back and ready to breathe with a new Kinsler intake.

The ‘67 Camaro’s wiring issues are cleaned up.

Ride along with Kevin Byrd and some of his Factory Five friends on a pilgrimage to Plymouth.

Kevin and Bryan continue on the ‘67 Camaro by rebuilding the quadra-jet carburetor.

Bryan and Kevin marry an engine transmission and work on patch panels for the Nova project.

Bryan Fuller and share their expertise on a variety of automotive tech issues of high interest to the do-it-yourselfer and trade professional.

Bryan tightens the bumper on a 1969 Chevy Van and Kevin lights a fire with the wrong gauge wire.

Bryan does some welding on a ‘66 Nova while Kevin takes a trip to the dyno to dial in the new EFI system for the small block engine.

Find out how much electrical wiring on a new age super car. Not as much as one might think.

Sam learns what it takes to create a new kind of paint from start to finish

The Rat Rod is ready to finally crank after Fuller fabricates up some trunk pieces and Sam finishes up the wiring.

The guys upgrade the brakes on the “Garage Find” ‘67 Camaro project.

Sam builds the lower end of a 350 Chevy while Bryan spends some time with Bruton Smith, owner of the new Zmax drag strip.

Sam finds a lost treasure in a garage.

Bryan and Sam build custom brake lines for his ‘39 GMC project truck.

Bryan and Byrd add an overdrive transmission to a 1972 Chevelle.

Sam Memmolo and Bryan Fuller share their expertise on a variety of automotive tech issues of high interest to the do-it-yourselfer and trade professional.

Sam Memmolo and Bryan Fuller share their expertise on a variety of automotive tech issues of high interest to the do-it-yourselfer and trade professional.

Fuller dreams of a life in Surf City, California and finds a garage of dream cars along the way.

Sam and Bryan finish up the Rat Rod project and hit the road.

Sam and Bryan look over the ‘67 Camaro and find some electrical problems.

Engine specialist Kevin Byrd stops by to help Sam put together a Chevrolet small-block.